Products can be selected via the "drop-down" menu
9.999,00 €
excl. VAT free shipping to selected countries
Free shipping to the following countries: Germany Show more Show less
Products can be selected via the "drop-down" Menu
9.999,00 €
excl. VAT free shipping to selected countries
Free shipping to the following countries: Germany Show more Show less
Products can be selected via the "drop-down" Menu
9.999,00 €
excl. VAT free shipping to selected countries
Free shipping to the following countries: Germany Show more Show less
R34 PRODUCTS IN DETAIL
N1 Style Air Vents
Price:
Item Description:
The N1 Style Air Vents are the "icing on the cake" for every R34 front.
Regardless of whether it is a GTR R-Tune Style or a series OEM front: The N1 Air Vents always work
The additional openings below the "radiator grille" give the water cooler, the intercooler and the entire engine compartment more airflow => better cooling.
The N1 Air Vents are not only an enhancement of the optics, but also make perfect sense from a technical point of view.
The N1 Air Vents fit without any adjustment work on the front bumper. They are glued to the front bumper from behind using hot glue or body glue.
Before assembly, 2 holes must be drilled in the front bumper. Of course, that takes a lot of effort at first.
But in order to be more sure of his cause, every customer is given a cut to size FRP template for the N1 Air Vents, with which he can simulate the look of the N1 Vents and get a first impression of the look on his skyline.
More precisely, these are the N1 Air Vents that I have laminated, but without the funnel that later goes towards the vehicle engine compartment. This means that you only have the front panel, so to speak, and can hold it to the front.
So you immediately get an impression of how well the N1 vents fit on the radius of the front bumper.
The N1 Air Vents are unpainted new goods (made by myself in Germany)
The material is FRP (glass fiber plastic)
The surface of the FRP component consists of gelcoat and must be filled and sanded before painting.
To be on the safe side, mount and check all components BEFORE painting! ! !
It is entirely possible that the "R34 N1 Air Vents" could also fit other models.
The "Borrow-dummy" can also be used to test this.
The loan fee for the "Borrow-dummy" is 50€ and will be credited back to you after it has been returned.
Shipping costs are 14€ (within the EU)
Shipping costs for UK are 27€
Shipping costs for other european countries are 30€
Shipping costs for USA are 37€
Shipping costs worldwide are 46€
GTR R-Tune Style Frontbumper for R34 GT-T
5 order options:
Item Description:
The GTR R-Tune style frontbumper gives the R34 GTT an extreme look.
Due to the larger openings, e.g. in the area of the "radiator grille", the water cooler and the entire engine compartment get more airflow => better cooling.
In addition, the additional openings in the frontbumper can be used, for example, to implement hoses for brake cooling or a cold air intake.
The R-Tune style frontbumper is not only an upgrade of the optics, but also makes sense from a technical point of view.
The frontbumper fits the GT-T without any adjustment work. In the picture with the unpainted front, it is only attached to the fender with the 2 screws and thus hangs down a bit at the front, which means that the gap dimensions to the headlight are not representative.
The final gap dimensions can be seen better on the pictures of the other GTTs from our customers.
The OEM GT-T indicators fit into the GTR front (so you don't have to buy new ones)
The GTR Style front bumper is an unpainted new product (made by myself in Germany)
The material is FRP (glass fiber plastic)
The surface of the FRP component consists of gelcoat and must be filled and sanded before painting.
To be on the safe side, mount and check all components BEFORE painting! ! !
The front bumper fits the R34 GTT without any adjustment work. That means you don't have to saw the front into 3 parts to adapt it to the vehicle, as is unfortunately the case with some other providers. To substantiate this, a YouTube video can be found in which I remove the front bumper from the negative form and then attach it directly to a standard R34 and attach it to the fender with just 2 screws in the first step:
- The front bumper is also suitable for the R34 GT & GT-T Sedan (4-door) models.
- The front bumper does not fit Plug & Play on GTR fender width.
- If the option "suitable for GT-T hood" is selected, it must be taken into account that the "hood lip / Bonnet lip / hood nose" that is glued / clamped onto the hood is not included. (this is the part that the GTR radiator grille optics also results in on the GT-T hood - the upper part of the radiator grille, so to speak)
Shipping costs via forwarding agency are depending on the distance and the country
For example, the shipping costs to the UK
are around €250 to €300
R34 GT-T Frontlip (Design 1)
Price:
Item Description:
This front lip gives your R34 a slightly more aggressive look with little investment.
The front lip is an unpainted new product (made by myself in Germany)
The material is FRP (glass fiber plastic)
The surface of the FRP component consists of gelcoat and must be filled and sanded before painting.
To be on the safe side, mount and check all components BEFORE painting! ! !
The front lip fits on the front bumper without any adjustment work. That means you don't have to saw the lip into 3 parts to adapt it to the front, as is unfortunately the case with some other providers.
The front lip does not fit plug & play on the OEM S-Tune Frontbumper or GT-R Frontbumper.
Shipping costs are 30€ (within the EU)
R-Tune Style sideskirt spats for R34 GT-T
Price:
Item Description:
The fact that all 7 screw connection points are already in place means that you don't have to drill additional holes in the OEM Sideskirt or underbody to attach the FRP Sideskirt spats.
In addition, you do not have to glue the Side Skirt spats to the fenders, door sills and side wall with body adhesive, which is the case with conventional FRP Sideskirts. For assembly on the car it is sometimes necessary to use longer screws.
With these Sideskirt spats you get the R-Tune or Z-Tune optics on your R34 without having to cut back on the usual complete FRP Sideskirts. (Ruin paint by sticking with body adhesive on the side wall, fender, etc.)
This Sideskirt spats fit the standard Sideskirt of the R34 Coupé without any adjustment work. That means you don't have to spend a lot of time adapting the Sideskirt spats to the car, as is unfortunately the case with some other providers. To substantiate this, a YouTube video can be found in which I dismantle the unpainted Sideskirt spats, which were previously attached with only 2 of 7 screws, from the car, and explain some details of the Sideskirts in more detail:
The Spats are unpainted new products (made by myself in Germany)
The material is FRP (glass fiber plastic)
The surface of the FRP component consists of gelcoat and must be filled and sanded before painting.
To be on the safe side, mount and check all components BEFORE painting! ! !
The Sideskirt spats do not fit Plug & Play on the OEM Nismo Altia Sideskirts, S-Tune or GT-R Sideskirts.
The Sideskirt spats also do not fit the 4-door sedan model of the R34 (but something will come soon for the 4-door ...)
Shipping costs are 30€ (within EU)
R-Tune Style Altia sideskirt spats for R34 GT-T OEM Altia /Nismo sideskirts (coming soon)
Price:
Item Description:
With these Sideskirt spats you get the R-Tune or Z-Tune optics in combination with the Altia Sideskirts on your R34.
In combination with our Frontlip or GTR Frontbumper, you also ensure that the depth remains uniform and is not higher in the middle than the front and rear. This makes the car look lower and beefier. The bottom line is continued uniformly from front to back.
The Sideskirt spats are unpainted new products (made by myself in Germany)
The material is FRP (glass fiber plastic)
The surface of the FRP component consists of gelcoat and must be filled and sanded before painting.
To be on the safe side, mount and check all components BEFORE painting! ! !
These Sideskirt spats do not fit plug & play on the normal OEM Sideskirts, S-Tune or GT-R Sideskirts.
The Sideskirt spats also do not fit the 4-door sedan model of the R34 (but something will come soon for the 4-door...)
Shipping costs are 30€ (within EU)
Z-Tune Style rear spats for OEM R34 GT-T rear bumper
Price:
Item Description:
Since the Z-Tune Style Rear spats are longer than those for the GT-R Rearbumper, these Rear spats continue the line of the R34 GT and GT-T Rearbumper, so that a harmonious overall picture is created.
With these Rear spats in Z-Tune or R-Tune style, you get an even nicer overall look for your R34 with little money.
The rear approaches are unpainted new products (made by myself in Germany)
The material is FRP (glass fiber plastic)
The surface of the FRP component consists of gelcoat and must be filled and sanded before painting.
To be on the safe side, mount and check all components BEFORE painting! ! !
The Rear spats fit the standard Rearbumper of the R34 Coupé without any adjustments.
The rear extensions do not fit Plug & Play on the OEM Nismo / Altia rear apron, S-Tune rear bumper or GT-R rear.
The rear aprons do not fit plug & play on the 4-door sedan rear bumper either (but something will come soon for the 4-door...)
Shipping costs are 16€ (within EU)
Shipping costs for UK are 27€
Shipping costs for other european countries are 30€
Shipping costs for USA are 37€
Shipping costs worldwide are 46€
GTR Style Rearbumper for R34 GT-T side wall width
3 order options:
Item Description:
The GTR Style Rearbumper gives the R34 GT-T an extreme look thanks to the diffuser look.
This Rearbumper fits the GT-T without any adjustments.
For attachment, the two retaining plates are removed from the original Rearbumper and inserted directly into the GTR Style Rearbumper plug & play.
As a result, the original fastening points have been taken over 1 by 1 and the bumper can be securely and stable fastened (pressed-in threaded sleeve and threaded pin in the retaining plate)
In addition, the bumper is attached to the factory-provided angle plates at the bottom (2 pieces per side)
The license plate light and the reverse lights can be screwed off plug & play from the original Rearbumper and attached to the GTR Style Rearbumper.
The R-Tune / Z-Tune Rear spats are attached from below to the Rearbumper with 5 screws on each side.
The OEM GT-T reverse lights & license plate lights fit into the GTR Rearbumper Plug & Play (so you don't have to buy anything new)
The GTR Style Rearbumper is an unpainted new product (made by myself in Germany)
The material is FRP (glass fiber plastic)
The surface of the FRP component consists of gelcoat and must be filled and sanded before painting.
To be on the safe side, mount and check all components BEFORE painting! ! !
The Rearbumper fits the R34 GTT without any adjustment work. That means you don't have to widen the side walls or saw the rear bumper into 3 parts to adapt it to the vehicle, as is unfortunately the case with some other providers.
- The Rearbumper does not fit Plug & Play on GTR side wall width
- The rear bumper does not fit on R34 Sedan / 4door models (but something will come soon for the 4-door...)
Shipping costs via forwarding agency are depending on the distance and the country.For example, the shipping costs to the UK are around €250 to €300
4 door GTR Style Rearbumper for R34 Sedan
Price:
Item Description:
The GTR Style Rearbumper gives the 4-door R34 an extreme look thanks to the diffuser look.
This Rearbumper fits the Sedan without any adjustments. Both GT and GT-T models.
For attachment, the two retaining plates are removed from the original Rearbumper and inserted directly into the GTR Style Rearbumper plug & play.
As a result, the original fastening points have been taken over 1 by 1 and the bumper can be securely and stable fastened (pressed-in threaded sleeve and threaded pin in the retaining plate)
Furthermore, the bumper is attached at the bottom, in the middle, to an angle Plate that is present at the factory
The GTR Style Rearbumper is an unpainted new product (made by myself in Germany)
The material is FRP (glass fiber plastic)
The surface of the FRP component consists of gelcoat and must be filled and sanded before painting.
To be on the safe side, mount and check all components BEFORE painting! ! !
Material certificate for easier registration is included.
The Rearbumper fits the R34 Sedan GT and GTT without any adjustment work. That means you don't have to widen the side walls or saw the rear bumper into 3 parts to adapt it to the vehicle, as is unfortunately the case with some other providers.
- The Rearbumper does not fit Plug & Play on every Aftermarket GTR side wall width (but some do,
if they don't go too far down)
- The rear bumper does not fit on R34 Coupé models
Shipping costs via forwarding agency are depending on the distance and the country.
For example, the shipping costs to the UK are around €250 to €300
The Side Skirts for the 4-door that can be seen in the picture will be available from end of August.
R33 N1 Air Vents
Price:
Item Description:
The N1 Style Air Vents are the "icing on the cake" for every R33 front.
The additional openings below the "radiator grille" give the water cooler, the intercooler and the entire engine compartment more airflow => better cooling.
The N1 Air Vents are not only an enhancement of the optics, but also make perfect sense from a technical point of view.
The N1 Air Vents fit without any adjustment work on the front bumper. They are glued to the front bumper from behind using hot glue or body glue.
Before assembly, 2 holes must be drilled in the front bumper. Of course, that takes a lot of effort at first.
But in order to be more sure of his cause, every customer is given a cut to size FRP template for the N1 Air Vents, with which he can simulate the look of the N1 Vents and get a first impression of the look on his skyline.
More precisely, these are the N1 Air Vents that I have laminated, but without the funnel that later goes towards the vehicle engine compartment. This means that you only have the front panel, so to speak, and can hold it to the front.
So you immediately get an impression of how well the N1 vents fit on the radius of the front bumper.
The N1 Air Vents are unpainted new goods (made by myself in Germany)
The material is FRP (glass fiber plastic)
The surface of the FRP component consists of gelcoat and must be filled and sanded before painting.
To be on the safe side, mount and check all components BEFORE painting! ! !
It is entirely possible that the "R33 N1 Air Vents" could also fit other models.
The "Borrow-dummy" can also be used to test this.
The loan fee for the "Borrow-dummy" is 50€ and will be credited back to you after it has been returned.
Shipping costs are 14€ (within the EU)
Shipping costs for UK are 27€
Shipping costs for other european countries are 30€
Shipping costs for USA are 37€
Shipping costs worldwide are 46€
R33 V-spec Style rear spats for R33 GTR and gtst
2 order options:
Item Description:
With these Rear spats in V-spec Style you get an even nicer overall look of your R33 with little money.
The Rear spats are unpainted new products (made by myself in Germany)
The surface of the FRP components consists of gelcoat and must be filled and sanded before painting.
The rear extensions fit the standard rear of the R33 Coupé without any adjustment work. That means you don't have to make great adjustments to the rear extensions on the car.
Pictures of the rear approaches how well they fit on 2 customer cars can be seen above.
To be on the safe side, mount and check all components BEFORE painting! ! !
The rear spats does NOT fit plug & play on the 4-door / sedan rear of the R33
Shipping costs are 16€ (within EU)
Shipping costs for UK are 27€
Shipping costs for other european countries are 30€
Shipping costs for USA are 37€
Shipping costs worldwide are 46€
R33 "B1 Concepts" mounting kit for the R33 V-spec rear spats
Price:
Item Description:
With this mounting kit / assembly kit from "B1 Concepts", the V-spec rear spats can be optimally attached to the OEM rear bumper and in the wheel arch of your R33.
The radius of the lower part of the OEM rear bumper is super mapped with the mounting kit, and generates a flat screw-on surface for the rear spats. This increases the stability and assembly is easier by hand.
The set includes two mounting adapters including washers and nuts. All screws and self-locking nuts are included and are made of stainless steel. A hole must be drilled to mount it on the rear bumper. But this is only visible from below.
The mounting kit can be used for our Chrismo V-spec style rear spats (made of FRP) as well as for original V-spec rear spats from Nissan.
Material used: GreenTec Pro from Extrudr | FD3D GmbH
R32 N1 Air Vents
Price:
Item Description:
The N1 Style Air Vents are the "icing on the cake" for every R32 front.
The additional openings below the "radiator grille" give the water cooler, the intercooler and the entire engine compartment more airflow => better cooling.
The N1 Air Vents are not only an enhancement of the optics, but also make perfect sense from a technical point of view.
The N1 Air Vents fit without any adjustment work on the front bumper. They are glued to the front bumper from behind using hot glue or body glue.
Before assembly, 2 holes must be drilled in the front bumper. Of course, that takes a lot of effort at first.
But in order to be more sure of his cause, every customer is given a cut to size FRP template for the N1 Air Vents, with which he can simulate the look of the N1 Vents and get a first impression of the look on his skyline.
More precisely, these are the N1 Air Vents that I have laminated, but without the funnel that later goes towards the vehicle engine compartment. This means that you only have the front panel, so to speak, and can hold it to the front.
So you immediately get an impression of how well the N1 vents fit on the radius of the front bumper.
The N1 Air Vents are unpainted new goods (made by myself in Germany)
The material is FRP (glass fiber plastic)
The surface of the FRP component consists of gelcoat and must be filled and sanded before painting.
To be on the safe side, mount and check all components BEFORE painting! ! !
It is entirely possible that the "R32 N1 Air Vents" could also fit other models.
The "Borrow-dummy" can also be used to test this.
The loan fee for the "Borrow-dummy" is 50€ and will be credited back to you after it has been returned.
Shipping costs are 14€ (within the EU)
Shipping costs for UK are 27€
Shipping costs for other european countries are 30€
Shipping costs for USA are 37€
Shipping costs worldwide are 46€
R32 N1 side skirts
3 order options:
Item Description:
The Side skirts are unpainted new products (made by myself in Germany)
The material is FRP (glass fiber plastic)
The surface of the FRP component consists of gelcoat and must be filled and sanded before painting.
To be on the safe side, mount and check all components BEFORE painting! ! !
It is not yet known whether the Side skirts will also fit on the R32 gtst Coupé.
However, the Side skirts do not fit the 4-door sedan model of the R32
R32 N1 rear spats (coming soon)
to be continued...
Fichtenstr. 54 | 71560 Sulzbach a.d.M. | chrismo-parts@web.de
You can do it, too! Sign up for free now at https://www.jimdo.com